A WaterMark approved water softener to reduce scaling and spotting in your home or building. Insist on a certified system.
Hard water is water that contains dissolved minerals such as limestone, iron, sulphur, magnesium and calcium. If these minerals are not removed from your water, they will cause scaling, eventually blocking plumbing and shortening the life of appliances - particularly hot water units, dishwashers, washing machines, etc.
Say ‘no’ to scale in your facility. Minerals found in hard water build up in appliances such as hot water systems and dishwashers reducing their service life and making them less efficient. Soft water saves you money by replacing them less often and saves the environment by cutting waste.
Specifications
Valve Automatic E1-matic
Flow Rate 40 Lpm
Capacity 18,000 litres*
Connection 1†Male BSPT, ½†Drain
Min/Max Pressure 138-862 kPa
Operating Temperature 0 - 48°C
Power Supply 230V AC / 50 Hz
Warranty 6 years^
Replacement Media Kits RMK-SOL40
Accessories
WTV5090 - Micro switch for automation of external equipment. WTV5000 - Bypass assembly for testing, and maintenance. PTE30 - Hardness test kit. WTV5050 - Blending valve for partial hardness removal.
SS5000 - SoftenerSafe Media, 5 litres.
*Based on a hardness of 100ppm. Note: Chlorine (free chlorine) tolerance is 1ppm - high chlorine levels permanently damage the softening resin & is not covered under warranty. If chlorine exceeds this limit, we recommend a carbon pre-filter such as the WH2 or CFS Series. Please refer to Puretec for a specific recommendation. In any case, a carbon pre-filter is recommended to protect against chlorine spikes & prolong the resin life.
^Warranty is 1 year parts and labour, plus 5 years parts only. Excludes consumables.
